Ramset Dynabolt+ 10mmx75mm (bucket)

Description

The DynaBolt™ Plus Sleeve Anchor is a medium duty, torque controlled, expansion anchor, with an integrated pull-down section, designed for medium duty anchoring of timber and steel fixtures to concrete, brick or block. The DynaBolt™ Plus is available in a variety of different head styles including hex, flush, countersunk, round, hook and even a head style to accomdate tie wire. The are 3 coatings / materials, zinc plated (ZP), 316 stainless steel (SS316) and hot dipped galvanised (HDG).

FEATURES & BENEFITS

• The DynaBolt™ Plus patented expansion sleeve closes gaps of up to 5mm, pulling down on the fixture to induce clamp load and provide improved security.
• The DynaBolt™ Plus is a fully assembled through fixture anchor. Therefore, assembly, marking out and re-positioning of fixtures is eliminated making installation fast and easy.
• The choice of multiple head styles makes the DynaBolt™ Plus a versatile anchor for a variety of different applications.

INSTALLATION GUIDE

1.Drill or core a hole to the recommended diameter and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.

2.Insert the DynaBolt™ Plus through the fixture and drive with a hammer until the washer contacts the fixture.

3.Tighten the DynaBolt™ Plus, allowing the sleeve to twist and pull down the fixture firmly onto the substrate. For optimum performance, a torque wrench should be used.